TaijiUbuntu(太極烏邦圖)
- 10月 29th, 2009
- 由Yesican所發表
- 【瀏覽次數】:3,405 views
TaijiUbuntu is built with the coLinux kernel.This system is running Ubuntu on Windows XP.TaijiUbuntu is a Portable application. Users can use any Windows XP computer to run Ubuntu and just only need an USB storage device.

http://blog.yesican.tw
blog@yesican.tw
DownLoad Now!
此部分為隱藏內容,請 Login (登入)或 Register (註冊後登入)觀看內容。
System requirement:
1.USB Storage Device > 2GB
2.Disk C > 8 GB
3.Windows XP/2000 (not sure Vista or Win 7)
You do not need to reboot your computer to run TaijiUbuntu.
How to Use TaijiUbuntu?
It is easy to start TaijiUbuntu.
1. Double clicks Firstrun_TaijiUbuntu.bat
2.Open the Network connections and rename the Ethernet adapter Name:
for example:
“Local Area Connection” to Real_ethernet (Main Ethernet adapter)
“Local Area Connection no.” to TAP (TAP-Win32 Adapter V8-coLinux)
Note:If you do not want to rename he Ethernet adapter Name,you can to modify the TaijiUbuntu.conf:
eth0=ndis-bridge,”Local Area Connection”
eth1=tuntap,”Local Area Connection 2″
and modify Run_TaijiUbuntu.bat
netsh interface ip set address “TAP” static 192.168.0.1 255.255.255.0
to
netsh interface ip set address “Local Area Connection 2″ static 192.168.0.1 255.255.255.0
3.Double clicks Run_TaijiUbuntu.bat
Note:The Firstrun_TaijiUbuntu.bat just only execute once on a Windows XP computer.
It is easy to remove TaijiUbuntu.
All you have to do just double clicks Remove_TaijiUbuntu.bat
Save Your TaijiUbuntu image.
All you have to do just double clicks Save_TaijiUbuntu.bat
Note:You can rename the TaijiUbuntu source image file like Ubuntu-
9.04.ext3.upgrade-5gb.fs.000.7z (Please make sure your USB Storage Device have enough disk space.)
How to change your Ubuntu Language Support.
1.TaijiUbuntu default language is Chinese traditional.
2.for English Language:
rm -r -f /root/.gnomerc
detail to see Ubuntu locale setup.
3.for Chinese Simplified:
Detail to see the http://blog.yesican.tw/?p=496
change zh_TW.UTF-8 to zh_CN.UTF-8
4.Other Language:
Detail to see Ubuntu locale setup.
Note:
defaule memory for TaijiUbuntu is 1GB,if your memory < 1 GB,you must modify the TaijiUbuntu.conf file:
mem=1024
to
your_memory_size/2 (for example: 256)
To run TaijiUbuntu need Windows Administrator Account
The root of TaijiUbunt password is :
此部分為隱藏內容,請 Login (登入)或 Register (註冊後登入)觀看內容。





有註冊了, 但是沒收到 mail .
於本站註冊並不需要任何認證程序。
沒收到 mail 表示沒收到密碼, 我還是無法登入 ..
請確認您的email是沒問題的….
測試註冊新帳號………
有收到mail就有密碼….
站長真是功力高深,佩服佩服!對推廣UBUNTU很有幫助。
tap不正確無法啟動,應該是這一句我沒搞懂 “區域連線 no.” to TAP (TAP-Win32 Adapter V8-coLinux 虛擬網卡) 我是新手,可否再說明一下,謝謝您!
您沒有做這一步驟:

打開網路連線將網路卡更名
例如:
“區域連線” 更名為 Real_ethernet (主要網卡)
“區域連線 no.” 更名為 TAP (TAP-Win32 Adapter V8-coLinux 虛擬網卡)
注意:如果您不願意更改網路連線的名稱,可修改TaijiUbuntu.conf內容:
eth0=ndis-bridge,”區域連線”
eth1=tuntap,”區域連線 2″
修改 Run_TaijiUbuntu.bat
netsh interface ip set address “TAP” static 192.168.0.1 255.255.255.0
to
netsh interface ip set address “區域連線 2″ static 192.168.0.1 255.255.255.0
站長你好:
我網卡也變更完成… 也能連線到那 192.168.0.1
但我看機器上並沒有相關的 22 port
而也一直出現無法連線…
是我哪個步驟有誤???
感謝解答~!!
通常這類問題是防火牆的關係
建議您先點擊colinux-console-fltk.exe
這是coLinux的consel程式,若能看到完整的coLinux執行,那100%是Windows的防火牆擋住
我本身是將Windows的防火牆關閉
使用免費且強大的COMODO防火牆來設定
若無法看到coLinux的console,再看看您的記憶體大小,因為我預設給coLinux的記憶體有1GB。
站長你好:
我先點擊colinux-console-fltk.exe 登入無誤… 也執行完成相關程序….
在 Windows 的防火牆關閉
我記憶體大小有 2G …
TAP IP 是 192.168.0.1 (虛擬網卡)
用 SSH 連 192.168.0.1 都會找不到該服務?!
還會有什麼原因被卡住呢??
感謝大大….
喔,我了解您的問題了,TAP的IP是190.168.0.1
但是Ubuntu的內部ip是190.168.0.2
您在coLinux console打一下指令:ifconfig
看有沒有eth0和eth1
若沒有,請參考一下小站文章:
http://blog.yesican.tw/?p=139
納悶的是,TaijiUbuntu已經都設定好了呀….
理論上您已經可以透過FreeNX連進TaijiUbuntu了呀
代碼1068是什麼意思還是無法啟動服務耶
您可以先跟我說您的環境嗎?
例如:例如記憶體大小及您的檔案系統是NTFS還是FAT32還是FAT?
目前是已知USER使用上的的問題有:
1.由於TaijiUbunrt預設記憶體為1GB,若您原本記憶體<2GB請調整TaijiUbunrt.conf的mem值再試。
2.若C碟是FAT32或是FAT,TaijiUbunrt解壓後的鏡像檔為5GB,會受限於FAT32和FAT的檔案系統而不能解壓,因此無法執行。
3.TaijiUbunrt必須以管理者身分執行,若非以管理者身分執行亦此無法執行。。
thanks,你让生活变得简单了一点